Lassco Spinnit EBM-S Table-Top Paper DrillThe most economical 2 inch capacity table-top drill on the marketStationary table with an adjustable back-gauge slide guide systemProduct moves across the table for easy multi-hole drillingIdeal for small print operations
The Lassco Spinnit EBM-S Bench Model Paper Drill is an economical tabletop paper drill with a 2-inch drilling capacity. It has a stationary table with a back gauge slide guide system. Product moves across the table for easy multi-hole drilling. The bench model design makes it easy to place the unit almost anywhere in your workspace.
The EMB-S paper drill is ideal for offices, schools and small print operations.
Table size: 18 x 12 inchesBase footprint: 12 x 13-1/2 inchesTable height: 3-1/2 inchesMotor: 1/4 HP, 115 voltsMax drilling capactiy: 2 inchesActual weight: 62 lbs.Shipping weight: 104 lbs.Shipping dimensions: 35 x 25 x 23Ships via: UPS
EBM-10 Drill blocksStyle A 2 inch capacity hollow drill bits
All table-top model drills includeSharpening stoneChip clearerSpin-Eze drill bit lubricant5/16 inch drill bit
Some Pointers and Tips on Drilling: USE A SHARP DRILL BIT AT ALL TIMES. Generally, a drill bit can be used for approximately four (4) hours of use before it needs to be sharpened. Apply light pressure when sharpening. Too much pressure may cause flaring of the tip which renders the bit unusable. Drill Sharpeners are available and are recommended with purchase along with an extra drill bit. Sharpening stones are also recommended to debur the outside cutting edge of the your drill bits for better performance. Use of Drill-Ease or Spin-Eze lubricant is required. Finally, purchase drill blocks to stop the drill bit after it penetrates the drilled material.